Vehicle Preparation

Position the vehicle on a level work surface. Using screw or bottle jacks, adjust the vehicle PLP heights to the specified dimension above a level work surface. Vertical dimensions can be taken from the work surface to the locations indicated were applicable.

Fig 1: Engine Compartment Top View Dimensions

Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: Engine Compartment Side And Bottom View Dimensions

Courtesy of DAIMLERCHRYSLER CORP.

Fig 3: Rear Frame Section Side And Bottom View Dimensions

Courtesy of DAIMLERCHRYSLER CORP.

Fig 4: Windshield Opening Dimensions

Courtesy of DAIMLERCHRYSLER CORP.

Fig 5: Front And Rear Door Opening Dimensions

Courtesy of DAIMLERCHRYSLER CORP.

Fig 6: Rear Window And Liftgate Opening Dimensions

Courtesy of DAIMLERCHRYSLER CORP.