LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Vehicle Theft Security System (Service Information) >> Intrusion Module >> Removal

Intrusion Module: Removal

Fig 1: Removing/ Installing Intrusion Module
GC0041438Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the instrument panel top cover (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TOP COVER - REMOVAL) .
  3. Remove the two screws (2) that secure the module (1) to the instrument panel.
  4. Disconnect the module electrical connector (3).
  5. Remove the module from the instrument panel.
scientia non olet · About LEMON Manuals