LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System (Service Information) >> Door Lock Switch >> Removal

Door Lock Switch: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove front door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - REMOVAL) .
  3. Disconnect wire connector to door lock switch.
  4. Remove two attaching screws to switch.
  5. Remove the switch from trim panel.
scientia non olet · About LEMON Manuals