Front Wiper Arms: Installation

Fig 1: Removing/Installing Front Wiper Arm

Courtesy of DAIMLERCHRYSLER CORP.

Before installation activate wiper system to ensure the wiper module is in the PARK position. Position wiper arms so that the tip of the driver's blade and the middle of the passenger's blade is on the park line on the windshield. Refer to ADJUSTMENTS  for Wiper Arm Adjustment.

1. Place the arm on the pivot while the arm is in an over/centered position.
2. Install the wiper arm retaining nut and torque to 21 N.m (190 in. lbs.).
3. Install the wiper arm nut cap.
4. Close hood.