LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems - Exterior (Service Information) >> Park/Turn Signal Lamp >> Removal

Park/Turn Signal Lamp: Removal

  1. Remove headlamp access cover in splash shield. See Figure.
  2. Rotate socket counterclockwise one quarter turn.
  3. Remove bulb and socket from headlamp unit.
  4. Disconnect wire connector from back of front side marker/park/turn signal lamp. See Fig 1
Fig 1: Headlamp Access
GC0022926Courtesy of DAIMLERCHRYSLER CORP.
1 - HIGH BEAM LAMP
2 - LOW BEAM LAMP
3 - PARK/TURN SIGNAL LAMP
scientia non olet · About LEMON Manuals