LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems - Exterior (Service Information) >> Park/Turn Signal Lamp >> Installation

Park/Turn Signal Lamp: Installation

  1. Connect wire connector to the back of front side marker/park/turn signal lamp.
  2. Install bulb into headlamp unit. See Figure
  3. Rotate socket clockwise one quarter turn.
  4. Test operation of lamps.
  5. Install headlamp access cover into splash shield.
scientia non olet · About LEMON Manuals