LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems - Exterior (Service Information) >> License Plate Lamp >> Removal

License Plate Lamp: Removal

  1. Remove screws attaching license plate lamp to rear bumper. See Fig 1.
  2. Remove lamp from bumper.
  3. Remove bulb socket from lamp housing.
  4. Pull bulb from socket.
Fig 1: License Plate Lamp
GC0022933Courtesy of DAIMLERCHRYSLER CORP.
1 - CONNECTOR
2 - BULB
3 - LICENSE PLATE LAMP
scientia non olet · About LEMON Manuals