LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems - Exterior (Service Information) >> Fog Lamp Unit >> Installation

Fog Lamp Unit: Installation

CAUTION: Do not touch the glass of halogen bulbs with fingers or other possibly oily surface, reduced bulb life will result.
  1. Place fog lamp unit into position.
  2. Install the four screws (1) attaching fog lamp unit to fascia. See Figure.
  3. Connect wire connector (2) to the fog lamp unit (1). See Figure.
  4. Install lower splash shield (2). See Figure.