LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems - Exterior (Service Information) >> Back-Up Lamp >> Removal

Back-Up Lamp: Removal

  1. Using a fiber stick or equivalent, pry out on the outboard side of the lamp unit (2) at the fascia gap.
  2. Remove lamp assembly.
  3. Remove socket from housing.
  4. Disconnect the electrical connector (1) and twisting counterclockwise, pull bulb from lamp unit (2).
Fig 1: Back-Up Lamp Unit
G00232021Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals