LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems - Exterior (Service Information) >> Back-Up Lamp Unit >> Removal

Back-Up Lamp Unit: Removal

  1. Using a fiber stick or equivalent, pry out on the outboard side of the lamp unit (2) at the fascia gap.
  2. Remove back up lamp assembly (2).
  3. Remove the bulb from the lamp housing (2) by rotating it counterclockwise until the bulb socket is free of the housing (2).
scientia non olet · About LEMON Manuals