Vacuum Reservoir: Installation

Fig 1: Identifying Vacuum Reservoir

Courtesy of DAIMLERCHRYSLER CORP.

The vacuum reservoir is located in the right front fender well on the frame rail. It is made of plastic.

1. Connect hoses to reservoir.
   Fig 2: Reservoir Mounting Screws

   Courtesy of DAIMLERCHRYSLER CORP.
2. Install reservoir and tighten screws to 5 N.m (45 in. lbs.).
   Fig 3: Inner Splash Shield

   Courtesy of DAIMLERCHRYSLER CORP.
3. Install the inner splash shield.
4. Lower vehicle.
5. Install the negative battery cable.
6. Install the air cleaner lid, connect the inlet air temperature sensor and makeup air hose.