Cruise Control Systems: Servo: Removal: 1.6/2.0L

Fig 1: Speed Control System Components

Courtesy of DAIMLERCHRYSLER CORP.

1. Remove the air cleaner lid and makeup air hose. Refer to appropriate article. Refer to (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER ELEMENT - REMOVAL) or (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER ELEMENT - REMOVAL) .
   Fig 2: Removing/Installing Battery Negative Cable

   Courtesy of DAIMLERCHRYSLER CORP.
2. Remove the negative battery cable.
   Fig 3: Vacuum And Electrical Connection At Servo

   Courtesy of DAIMLERCHRYSLER CORP.

   1 - Electrical Connector

   2 - Vacuum Line and Nipple

3. Remove two nuts attaching speed control cable and mounting bracket to servo. See Fig 1.
4. Remove servo from the mounting bracket.
5. Disconnect electrical connectors and vacuum hose.
   Fig 4: Cable Retaining Clip

   Courtesy of DAIMLERCHRYSLER CORP.

   1 - HAIRPIN CLIP

6. Remove the engine cover.
7. Remove cable from throttle cam, (Refer to ELECTRICAL/SPEED CONTROL/CABLE - REMOVAL) .
8. Remove the 2 push nuts and discard.
9. Remove clip attaching cable to servo. See Fig 4.