2.4L Turbo

Fig 1: Cable Retaining Clip

Courtesy of DAIMLERCHRYSLER CORP.

1 - HAIRPIN CLIP

Install the retaining clip holding cable to servo.

Fig 2: Vacuum And Electrical Connection At Servo
Courtesy of DAIMLERCHRYSLER CORP.

1 - Electrical Connector

2 - Vacuum Line and Nipple
Install the vacuum line to the speed control servo.
Connect and lock the electrical connector to the speed control servo.

Fig 3: Speed Control Servo - 2.4L Turbo
Courtesy of DAIMLERCHRYSLER CORP.
Install the speed control servo to the mounting bracket.
Install the 2 nuts from the speed control servo studs.

Fig 4: Throttle Control Shield
Courtesy of DAIMLERCHRYSLER CORP.
Install the throttle control shield.

Fig 5: Removing/Installing Battery Negative Cable
Courtesy of DAIMLERCHRYSLER CORP.
Connect the negative battery cable.