LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Interior & Exterior (2 Of 2) >> Sunroof >> Sunroof Glass Panel Seal >> Installation

Sunroof Glass Panel Seal: Installation

NOTE: Always position seal seam on center side of the passenger side of glass panel.
  1. Place seal into position.
  2. Install seal on glass panel. Using care working the seal around the glass, being careful not to stretch the seal while installing.
  3. Replace sunroof glass panel (Refer to BODY/SUNROOF/GLASS PANEL - INSTALLATION) .
  4. Verify sunroof operation and alignment (Refer to BODY/SUNROOF/GLASS PANEL - ADJUSTMENTS) .
scientia non olet · About LEMON Manuals