LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Interior & Exterior (2 Of 2) >> Seats >> Rear Seat Back Cushion / Cover >> Removal

Rear Seat Back Cushion / Cover: Removal

Fig 1: SEAT BACK TRIM
GC0022558Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove seat from vehicle.
  2. Remove rear seat cushion side shields.
  3. Remove seat back.
  4. Remove track assembly.
    Fig 2: SEAT CUSHION FRAME, BACK FRAME, PIVOT
    GC0022557Courtesy of DAIMLERCHRYSLER CORP.
  5. Disengage J-strap attaching seat cover from the seat cushion frame.
  6. Pull cover off of the hog rings.
  7. Cut hog rings attaching seat cover to seat cushion pad.
  8. Remove seat cushion cover from seat cushion.
scientia non olet · About LEMON Manuals