LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Interior & Exterior (1 Of 2) >> Rear Door >> Rear Door Hinge >> Removal

Rear Door Hinge: Removal

NOTE: If both hinges on one door are to be replaced, remove and install one hinge completely prior to beginning the second hinge.
  1. With rear door closed apply tape to secure door into body.
  2. Open front door.
  3. Mark position of hinge on both the door end frame and lower B-pillar to ease installation.
  4. Remove B-pillar lower trim panel.
  5. Remove bolts attaching hinge to door end frame.
  6. Remove bolts attaching hinge to lower B-pillar.
  7. Remove door hinge from vehicle.
scientia non olet · About LEMON Manuals