LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Interior & Exterior (1 Of 2) >> Front Door >> Front Door Vertical Guide Bar >> Removal

Front Door Vertical Guide Bar: Removal

  1. Remove door trim panel and water dam.
  2. Remove door speaker, if equipped.
  3. Remove front lift guide.
  4. Remove bolt attaching top of front guide bar to inner door panel.
  5. Using a Snap-on® flare-nut socket (FRXM10) and a hex wrench, remove nut attaching bottom of guide bar to door panel while holding jack screws.