LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Interior & Exterior (2 Of 2) >> Interior >> Body Vent >> Removal

Body Vent: Removal

Fig 1: Body Vent
GC0020741Courtesy of DAIMLERCHRYSLER CORP.
1 - BODY VENT
2 - TRUNK WELL SIDE PANEL
  1. Hoist rear end of vehicle and support on safety stands.
  2. From behind rear bumper fascia below quarter panel, disengage clips attaching body vent (1) to wheel well.
  3. Remove body vent (1) from vehicle.
scientia non olet · About LEMON Manuals