Removal - Convertible

Fig 1: Door Glass Channel

Courtesy of DAIMLERCHRYSLER CORP.

1 - DOOR GLASS RAIL

2 - STABILIZER NUTS

3 - FRONT DOOR INNER TO GLASS STABILIZER

4 - DOOR GLASS CHANNEL

5 - ATTACHING SCREW(S)

6 - ATTACHING NUT

Remove door trim panel and water dam.
Remove the lift plate attaching screws (5).
Remove bolt attaching top of rear rail assembly to inner door panel.
Using a suitable Allen wrench, hold jack screw stationary while removing nut attaching bottom of rear rail (1) assembly to inner door panel.
Remove rear rail (1) assembly from vehicle and remove through access hole in inner door panel.