LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Chime & Buzzer >> Chime/Buzzer >> Diagnosis And Testing >> Brake/Park Brake Indicator >> If lamp fails to light inspect for:

If lamp fails to light inspect for:

  1. A broken or disconnected wire at the switch
  2. Defective switch
  3. A burned out Light Emitting Diode (LED)
  4. A damaged circuit board

To test the service brake warning system, refer to RED BRAKE WARNING INDICATOR .

scientia non olet · About LEMON Manuals