Power Top & Sunroof (Service Information): Motor/Module-Sunroof: Removal

WARNING: The Excessive Force Limitation (EFL) feature must be calibrated any time a sunroof motor/module is replaced with a new component. Failure to perform this procedure could result in vehicle damage and/or personal injury. Refer to EXCESSIVE FORCE LIMITATION (EFL) CALIBRATION for the appropriate procedure.

Disconnect the battery negative cable.
Remove the vehicle headliner, (Refer to BODY/INTERIOR/HEADLINER - REMOVAL) .

Fig 1: Locating Sunroof Motor/Module
Courtesy of DAIMLERCHRYSLER CORP.
Remove the power sunroof motor/module electrical connector (2).
Remove the retaining screws (3) and remove the motor/module (1) from the vehicle.