LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> 300 Base, 42RLE/VLP >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster (Service Information) >> Instrument Panel Switch Pod >> Installation

Instrument Panel Switch Pod: Installation

Fig 1: Screws
GC0016054Courtesy of DAIMLERCHRYSLER CORP.
  1. Place the switch pod in the bezel opening and install the two screws (1).
  2. Install the instrument panel center bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .
  3. Connect the battery negative cable.
scientia non olet · About LEMON Manuals