Stationary Glass: Glass-Quarter: Removal

Fig 1: Quarter Glass

Courtesy of DAIMLERCHRYSLER CORP.

1. Before proceeding with the following repair procedure, review all warnings and cautions (Refer to BODY/STATIONARY GLASS - WARNING) .
2. Remove the quarter panel trim from the side of the vehicle being serviced.
3. Carefully pull down the headliner to access the upper mounting studs (1) that secure the quarter glass (2) to the window fence (3) and, remove the nuts from the studs.
4. Remove the nuts that secure the lower mounting studs (4) to the window fence and, remove the nuts from the studs.
5. Using razor knife, cut butyl sealer between the mounting studs that secure the quarter glass to window fence.
6. Carefully push the quarter window glass from the opening.