Glass Run Channel: Removal

Fig 1: Rear Door Glass Channel And Bracket

Courtesy of DAIMLERCHRYSLER CORP.

Remove the trim panel from the inside of the rear door. (Refer to BODY/DOOR - REAR/TRIM PANEL - REMOVAL) .
Remove the watershield from the inside of the rear door. (Refer to BODY/DOOR - REAR/WATERSHIELD - REMOVAL) .
Loosen the two screws (1) that secure the rear door glass channel and bracket (2) to the inside of the rear door.
Disengage the two screws from the keyed holes near the back of the inner door panel and remove the channel and bracket from the interior of the rear door.