Instrument Panel: Bezel-Cluster: Removal: Notes

Fig 1: Bezel-Ignition Switch Remove Chrysler

Courtesy of DAIMLERCHRYSLER CORP.

1. Before proceeding with the following repair procedure, review all warnings and cautions.
2. Using a trim stick C-4755 or equivalent (1), gently pry between the ignition switch bezel (2) and the instrument cluster bezel (3) to release the snap retainers that secure the switch bezel.
3. Remove the ignition switch bezel from the vehicle.
   Fig 2: Bezel-Cluster Remove Chrysler

   Courtesy of DAIMLERCHRYSLER CORP.
4. Using a trim stick C-4755 or equivalent (1), gently pry between the instrument panel (2) and the cluster bezel (3) to release the snap clip retainers that secure the cluster bezel.