LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> 300 Base, 42RLE/VLP >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Exterior >> Shield-Wheelhouse - Rear >> Removal

Shield-Wheelhouse - Rear: Removal

Fig 1: Shield 1
GC0013437Courtesy of DAIMLERCHRYSLER CORP.
  1. Raise and support the vehicle.
  2. Remove the wheels from the side of the vehicle being serviced (Refer to TIRES/WHEELS - REMOVAL) .
  3. Remove the rear portion of the body side cladding from the side of the vehicle being serviced (Refer to BODY/EXTERIOR/BODY SIDE CLADDING - REMOVAL) .
  4. Remove the nuts (1), bolt (2) and the push-pins (4), that secure the lower rear wheelhouse shield (3) to the body.
  5. Remove lower rear wheelhouse shield from the vehicle.
    Fig 2: Shield 2
    GC0013438Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the push-pins (1) that secure the rear wheelhouse shield (2) to the body.
  7. Remove the rear wheelhouse shield from the vehicle.