Door Rear: Door: Removal

Open and support door on a suitable lifting device.
Mark hinges attachment locations with a grease pencil or other suitable device to aid installation.
Disengage wire connector at hinge B-pillar. See Fig 1.
Remove bolts attaching door check strap to B-pillar.
Remove the nuts and remove the door from vehicle.

Fig 1: Rear Door/Hinges

Courtesy of DAIMLERCHRYSLER CORP.

1 - UPPER HINGE NUTS

2 - UPPER HINGE

3 - ELECTRICAL CONNECTOR

4 - CHECK STRAP

5 - LOWER HINGE

6 - LOWER HINGE NUTS