LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior - Except Coupe >> Weatherstrip/Seals >> Door Inner Belt Weatherstrip >> Removal

Door Inner Belt Weatherstrip: Removal

  1. Remove door trim panel.
  2. Pull upward on rear edge of inner belt weatherstrip. See Fig 1.
  3. Remove weatherstrip from vehicle.
Fig 1: Door Inner Belt Weatherstrip
GC0031546Courtesy of DAIMLERCHRYSLER CORP.
1 - MIRROR FLAG/GLASS CHANNEL
2 - INNER BELT WEATHERSTRIP
3 - START THIS END FIRST
scientia non olet · About LEMON Manuals