Removal - Jr-27 Only

NOTE: Special care should be taken when removing rear seat cushion to prevent damage to the cushion frame. Remove cushion at attachment areas, not at wing area.

Push firmly rearward and upward at one attachment point and disengage wire loops from retainers in floor pan. See Fig 1.
Repeat for other attachment point.
Separate rear seat cushion from vehicle.

Fig 1: Rear Seat Cushion

Courtesy of DAIMLERCHRYSLER CORP.

1 - REAR SEAT BACK

2 - REAR SEAT CUSHION

3 - INNER SEAT BELTS