LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior - Except Coupe >> Hood >> Hinge >> Removal

Interior & Exterior - Except Coupe: Hood: Hinge: Removal

  1. Support hood on the side that requires hinge replacement.
  2. Mark hinge attachment locations with a grease pencil or other suitable device to aid installation.
  3. Remove cowl cover (Refer to BODY/EXTERIOR/COWL GRILLE - REMOVAL) .
  4. Remove bolts attaching hood to hinge.
  5. Remove bolts attaching hood hinge to load beam inner and remove hinge from vehicle.
scientia non olet · About LEMON Manuals