LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior & Exterior - Except Coupe >> Exterior >> Tape Stripe >> Removal - Adhesives

Removal - Adhesives

  1. Mark reference points before removing.
  2. Using a heat gun gently apply heat in a circular motion to loosen the adhesive bond.
  3. Using the trim stick C 4755 or equivalent, lift up and peel away badging /tape from panel, using a heat gun as you go.
  4. Clean off all traces of adhesive from the panel(s) with a general purpose adhesive remover.
scientia non olet · About LEMON Manuals