Removal - Jr-27

Remove door trim panel and watershield.
Remove the lift plate attaching screws. See Fig 1.
Remove nut attaching top of guide bar to inner door panel.
Using a suitable Allen wrench, hold jack screw stationary while removing nut attaching bottom of guide bar to inner door panel.
Remove guide bar from vehicle and remove through access hole in inner door panel. See Fig 2.

Fig 1: Glass To Lift Plate Attaching Screws

Courtesy of DAIMLERCHRYSLER CORP.

1 - FRONT DOOR GLASS

2 - GLASS TO LIFT PLATE RETAINER AND NUT ASSEMBLY

3 - GLASS TO LIFT PLATE BUSHING

4 - GLASS TO LIFT PLATE ATTACHING SCREWS

5 - GLASS TO WINDOW CHANNEL ATTACHING NUTS

6 - DOOR GLASS UP STOP

Fig 2: Rear Vertical Guide Bar

Courtesy of DAIMLERCHRYSLER CORP.

1 - DOOR

2 - JACK SCREW

3 - REAR VERTICAL GUIDE BAR