Glass - Front/Rear Adjustment
- Remove quarter trim panel. (Refer to BODY/INTERIOR/QUARTER PANEL TRIM - REMOVAL)
- Remove center and rear side rail weatherstrips from side rail weatherstrip retainer channels.
- Loosen glass attachment bolts.
- Raise quarter glass and position correctly. See Figure.
- Tighten all fasteners.
- Install center and rear side rail weatherstrips to side rail weatherstrip retainer channels.
- Cycle quarter glass between full up and full down positions. Verify operation and adjust as necessary.
- Install quarter trim panel. (Refer to BODY/INTERIOR/QUARTER PANEL TRIM - INSTALLATION)