LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - Except Coupe >> Diagnostic Information And Procedures >> Power Door Locks/RKE >> Symptom: *DRIVER DOOR FAILS TO UNLOCK FROM ANY SWITCH >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC PROCEDURE - ONE DOOR FAILS TO LOCK AND UNLOCK FROM ANY SWITCH

TEST ACTION APPLICABILITY
1 Turn the ignition off.
Disconnect the Body Control Module C4 connector.
Measure the resistance between ground and the Driver Unlock Relay Output circuit in the Body Control Module C4 connector
Is the resistance below 100.0 ohm?
No --> Replace the Body Control Module in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1 .
Yes --> Repair the Driver Unlock Relay Output circuit for a short to ground.
Perform BODY VERIFICATION TEST - VER 1 .
All