LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - Except Coupe >> Diagnostic Information And Procedures >> Power Door Locks/RKE >> Symptom: *DRIVER DOOR FAILS TO LOCK FROM ANY SWITCH >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC PROCEDURE - DRIVER DOOR FAILS TO UNLOCK FROM ANY SWITCH

TEST ACTION APPLICABILITY
1 Disconnect the Body Control Module C4 connector.
Measure the resistance between ground and the Driver Lock Relay Output circuit.
Is the resistance below 100.0 ohms?
Yes --> Repair the Driver Lock Relay Output circuit for a short to ground.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Replace the Body Control Module - Driver Unlock Relay Ground open.
Perform BODY VERIFICATION TEST - VER 1 .		 All
scientia non olet · About LEMON Manuals