LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - Except Coupe >> Diagnostic Information And Procedures >> Power Door Locks/RKE >> Symptom: *ALL DOORS FAILING TO LOCK FROM ANY SWITCH >> Diagnostic Procedure

Diagnostic Procedure

DIAGNOSTIC PROCEDURE - ALL DOORS FAILING TO LOCK FROM ANY SWITCH

TEST ACTION APPLICABILITY
1 Disconnect the Body Control Module C4 connector.
Measure the resistance between ground and any Lock Relay Output circuits in the BCM C4 connector..
Is the resistance below 1000.0 ohms (should be infinite)?
Yes --> Repair the Lock Relay Output circuits as necessary.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Go To 2		 All
2 If there are no possible causes remaining, view repair
Repair
Replace the Body Control Module.
Perform BODY VERIFICATION TEST - VER 1 .		 All
scientia non olet · About LEMON Manuals