Shifter Bezel: Removal
- Remove shifter knob.
- Using a trim stick C-4755 or equivalent, disengage the locking tabs and remove shifter bezel. See Fig 1.
- Raise shift bezel and disconnect wire connector.
- Remove shift bezel from vehicle.
| 1 - INSTRUMENT PANEL |
| 2 - AUTOSTICK SHIFTER ASSEMBLY |
| 3 - TRACTION CONTROL SWITCH |
| 4 - TRANSMISSION RANGE INDICTOR SURROUND BEZEL |
| 5 - KNOB SET SCREW |
| 6 - SHIFTER KNOB |
| 7 - FLOOR SHIFT BEZEL |
| 8 - WIRE CONNECTOR |
| 9 - INSTRUMENT PANEL WIRING HARNESS |
| 10 - INSTRUMENT PANEL WIRING CLIP |