VTSS/Skis Indicator Lamp: Description

The Sentry Key Immobilizer System (SKIS) uses an indicator light to convey information on the status of the system to the customer. This light is shared with the Vehicle Theft Security System (VTSS). The light is located in the instrument panel switch pod, just to the right of the cluster. The indicator light is controlled by the Body Control Module (BCM), via Programmable Communication Interface (PCI) data bus communication with the cluster, based upon messages it receives from the Sentry Key Remote Entry Module (SKREEM) on the PCI data bus, and is hard wired to the cluster.