Diagnostic Procedure
ANTENNA HARDWARE FAILURE - SDARS SYMPTOM CHART
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Turn the ignition off.
NOTE:
Disconnect the Satellite Radio Receiver harness connector and check the related wiring terminals for corrosion, damage or terminal push out. Repair as necessary.
NOTE:
Disconnect the Satellite Receiver Antenna connector and check the related wiring terminals for corrosion, damage or terminal push out. Repair as necessary. Using the schematics as a guide, inspect the wire harness and connectors. Pay particular attention to all Power and Ground circuits. Check the Antenna assembly for physical damage. If there are no other possible causes, view repair. Repair Replace Antenna in accordance with service information. Perform BODY VERIFICATION TEST - VER 1 . |
All |