Diagnostic Procedure
BLUETOOTH ERROR SYMPTOM CHART
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 |
NOTE:
This trouble code indicates an internal Hands Free Module fault. With the DRBIII®, read and record the HFM DTCs and then erase the DTCs.Perform 5 ignition key cycles, leaving the ignition key on for a minimum of 90 seconds per cycle.With the DRBIII®, read the DTCs.Did the same DTC return?Yes --> Replace and program the Hands Free Module in accordance with the Service Information.Perform BODY VERIFICATION TEST - VER 1 .No --> Test Complete. |
All |