Diagnostic Procedure
WINDOW LOCKOUT SWITCH STUCK - DDM SYMPTOM CHART
| TEST | ACTION | APPLICABILITY |
|---|---|---|
| 1 | Turn the ignition on. With the DRBIII®, erase DTCs. Cycle the ignition switch from Off to Run. Check for any possible obstructions with the switch and correct if necessary. Operate the DDM Window Lockout Switch several times. With the DRBIII®, read DTCs. Does the DRBIII® display WINDOW LOCKOUT SWITCH STUCK? Yes --> Replace the Driver Door Module. Perform BODY VERIFICATION TEST - VER 1 . No --> The condition that caused this code to set is not present at this time. Operate the switch several times to ensure it does not stick. If the switch ever sticks, replace the Driver Door Module. Perform BODY VERIFICATION TEST - VER 1 . |
All |