LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - Diagnostic Information And Procedures - HVAC, Ignition Power Accessory, Instrument Cluster, Interior Lighting, Navigation, Overhead Console >> Instrument Cluster >> Symptom: NAV SWITCH INPUT STUCK >> Diagnostic Procedure

Diagnostic Procedure

NAV SWITCH INPUT STUCK SYMPTOM CHART

TEST ACTION APPLICABILITY
1
NOTE: Diagnose and repair any NAV Switch Input Short or Open DTC's before proceeding with this test.
With the DRBIII®, record and erase DTC's.Cycle the ignition switch from ON to OFF to ON.With the DRBIII®, read DTC's.Wait 30 seconds.Does the DRBIII® display NAV SWITCH INPUT STUCK?Yes --> Replace the Instrument Cluster Switch Pod in accordance with the Service Information.Perform BODY VERIFICATION TEST - VER 1 .No --> The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors for an intermittent condition.Perform BODY VERIFICATION TEST - VER 1 .		 All
scientia non olet · About LEMON Manuals