LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - Diagnostic Information And Procedures - HVAC, Ignition Power Accessory, Instrument Cluster, Interior Lighting, Navigation, Overhead Console >> Instrument Cluster >> Symptom: LEFT TURN SIGNAL INDICATOR OPEN - BCM >> Diagnostic Procedure

Diagnostic Procedure

LEFT TURN SIGNAL INDICATOR OPEN - BCM SYMPTOM CHART

TEST ACTION APPLICABILITY
1 Turn the ignition off.
Disconnect the BCM C4 harness connector.
Turn the ignition on.
Measure the voltage between the Left Turn Signal circuit and ground.
Is the voltage below 5 volts?
Yes --> Replace the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Go To 2		 All
2 Turn the ignition off.
Disconnect the BCM C4 harness connector.
Disconnect the Instrument Cluster harness connector.
Measure the resistance of the Left Turn Signal circuit.
Is the resistance above 5.0 ohms?
Yes --> Repair the Left Turn Signal circuit for an open.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Replace the BCM in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1 .		 All
scientia non olet · About LEMON Manuals