LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Diagnostic Procedures - Diagnostic Information And Procedures - HVAC, Ignition Power Accessory, Instrument Cluster, Interior Lighting, Navigation, Overhead Console >> Heating & A/C >> Symptom: PAS FRONT DOOR MESSAGE MISSING (ACTIVE) - ATC >> Diagnostic Procedure

Diagnostic Procedure

PAS FRONT DOOR MESSAGE MISSING (ACTIVE) SYMPTOM CHART

TEST ACTION APPLICABILITY
1 Turn the ignition on.
With the DRBIII®, read the active ATC DTCs.
Does the DRBIII® display: NO COMMUNICATION WITH PDM?
Yes --> Return to the Heating & A/C symptom list and choose the symptom.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Go To 2
All
2 Turn the ignition on.
With the DRBIII®, read PDM DTCs.
Does the DRBIII® display any DTCs?
Yes --> Refer to the appropriate test for the related symptom(s).
Perform BODY VERIFICATION TEST - VER 1 .
No --> Go To 3
All
3 Turn the ignition on.
With DRBIII® in ATC, Monitor Display, PCI Bus Messages, look for the following message:
"RT FR DOOR AJAR SW:"
Is "NO RESPONSE" displayed after this message?
Yes --> Replace the Passenger Door Module (PDM) in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1 .
No --> Replace the Automatic Temperature Control (ATC) in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1 .
All