LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Weatherstrip/Seals >> Liftgate Upper Secondary Weatherstrip >> Removal

Liftgate Upper Secondary Weatherstrip: Removal

  1. Warm the affected stick on upper secondary weatherstrip and body metal to approximately 27° C (80° F) using a suitable heat lamp or heat gun.
  2. Pull stick on weatherstrip from painted surface.
  3. Remove adhesive tape residue from painted surface of vehicle.
  4. Use a 3M Scotch-Brite™ Molding Adhesive and Stripe Removal Disc, or equivalent, to clean adhesive residue from painted surfaces. These products are available from automotive paint suppliers. Refer to instructions supplied with the specific product for proper usage.
scientia non olet · About LEMON Manuals