Third Row Load Floor Panel: Removal

Open liftgate.
Using finger, disengage fold flat cable from handle. See Fig 1.

Fig 1: FOLD FLAT CABLE
Courtesy of DAIMLERCHRYSLER CORP.

1 - RELEASE CABLE
Release tab attaching fold flat handle to load floor panel. See Fig 2.
Disconnect fold flat cable from handle and remove handle from load floor panel.

Fig 2: REMOVE FOLD FLAT HANDLE
Courtesy of DAIMLERCHRYSLER CORP.

1 - PRY TAB INWARD

2 - TRIM TOOL
Remove load floor panel by using a trim tool and lifting up the edges to disengage the push pins. See Fig 3.

Fig 3: REMOVE LOAD FLOOR PANEL
Courtesy of DAIMLERCHRYSLER CORP.

1 - TRIM TOOL

2 - LOAD FLOOR PANEL
Remove load floor panel from seat back frame.
Remove child seat tether bezel, if equipped. See Fig 4.

Fig 4: REMOVE CHILD SEAT TETHER BEZEL
Courtesy of DAIMLERCHRYSLER CORP.

1 - CHILD SEAT TETHER BEZEL