Coolant Supply Line

Raise vehicle on hoist.
Drain cooling system (Refer to COOLING/ENGINE - STANDARD PROCEDURE) .
Remove banjo bolt from coolant supply line at turbocharger. See Fig 1.
Disconnect coolant supply line flared fitting from brass fitting at engine block. See Fig 2.
Remove coolant supply line.

Fig 1: Coolant Lines - Banjo Fittings

Courtesy of DAIMLERCHRYSLER CORP.

1 - COOLANT RETURN LINE

2 - BANJO BOLTS - 30 N.m (22 ft. lbs.)

3 - COOLANT SUPPLY LINE

Fig 2: Coolant Supply Line - Engine Block Fitting

Courtesy of DAIMLERCHRYSLER CORP.

1 - BRASS FITTING - 41 N.m (30 ft. lbs.)

2 - FLARED FITTING - 31 N.m (23 ft. lbs.)

3 - COOLANT SUPPLY LINE