LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Exhaust System & Turbocharger >> Lines And Hoses >> Installation - Lines And Hoses >> Oil Supply Line

Oil Supply Line

  1. If brass fitting was removed from engine block or turbocharger, apply thread sealer to threads and install. Torque brass fitting to 41 N.m (30 ft. lbs.).
  2. Position oil supply line to mounting location.
  3. Hand start flared fitting at turbocharger. See Figure.
  4. Raise vehicle on hoist.
  5. Hand start flared fitting at engine block. See Figure.
  6. Torque flared fittings to 31 N.m (23 ft. lbs.). See Figure and Figure.
  7. Install elbow support bracket. See Figure.
  8. Lower vehicle.
scientia non olet · About LEMON Manuals