LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frames & Bumpers >> Front Bumper Reinforcement >> Removal

Front Bumper Reinforcement: Removal

  1. Remove grille (Refer to BODY/EXTERIOR/GRILLE - REMOVAL) .
  2. Remove front fascia (Refer to FRAME & BUMPERS/BUMPERS/FRONT FASCIA - REMOVAL) .
  3. Remove bolts attaching reinforcement to the rail assembly and Remove reinforcement. See Fig 1.
  4. Remove bumper reinforcement from vehicle.
Fig 1: Front Bumper Reinforcement
GC0021970Courtesy of DAIMLERCHRYSLER CORP.
1 - U-NUT(S)
2 - FRONT BUMPER FASCIA REINFORCEMENT
scientia non olet · About LEMON Manuals