LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Front Wiper Arms >> Removal

Front Wiper Arms: Removal

  1. Place the wiper arm/blades in the PARK position and turn ignition OFF.
  2. Open hood.
  3. Using a trim stick (special tool #C-4755) or equivalent, gently pry up on the wiper arm nut cap and remove. See Fig 1.
    Fig 1: Front Wiper Arm - Remove/Install
    GC0021955Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove wiper arm retaining nut. See Fig 1.
  5. Remove the arm from the pivot using a rocking motion while the arm is in an over/centered position. See Fig 1.
  6. Clean metal splinters OFF the pivot shafts.
scientia non olet · About LEMON Manuals